GM45 Thinkpad Internal flashing research

From coreboot
Jump to navigation Jump to search

The wiki is being retired!

Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome!

Introduction

The goal is to be able to flash internally the x200 with Flashrom.

Anti-reflashing mechanisms

The Lenovo X200 uses the following mechanisms to prevent internal reflashing:

  • Flash descriptor: Set the flash descriptor read-only, locks the ME, and platform regions.
  • PR registers: Sets the BIOS bootblock read-only and prevent access to the platform region
  • The BUC.TS register is locked.

Non-working approaches

  • If we remove the flash descriptor read-only protection we are able to easily reflash coreboot, but:
    • The flash descriptor restrictions may be able to be lifted by using the GPIO33, but accessing that pin is very difficult and has huge probability of breaking the board.
    • Finding a command to send to the ME to unlock it is very unlikely, as it is only supposed to work when the management engine is in manufacture-mode. The Me is not in manufacture-mode on production laptops.
    • Find a way to disable or crash the ME would probably have no effect at all on flash protections

Approaches

  • The bootblock is read-only, and sets the PR registers protections. There might be a way to ask it nicely to remove such protections, to be able to reflash coreboot.
  • Modded boot firmware that disable WiFi card whitelist, have some unused components:
    • A bootblock that doesn't set the PR registers
    • A flash descriptor that disables the Management Engine
  • They are unused during the boot fimrware update,because it will only update other sections of the image.
Retrieved from "https://www.coreboot.org/index.php?title=GM45_Thinkpad_Internal_flashing_research&oldid=24327"